Acer TravelMate 320 User Guide - Page 111
Start, Settings, Control Panel, Modems, Dialing Properties, PS/2 Y-Bridge Cable
View all Acer TravelMate 320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
91 connectors and there is only one PS/2 port on the computer. To connect two PS/2-type devices to the computer, you need to use a PS/2 Y-bridge connector. See "PS/2 Y-Bridge Cable" on page 54 for details. The printer does not work. Check the following: ❑ Make sure that the printer is connected to a power outlet and it is turned on. ❑ If you want to connect a parallel printer, you can purchase a USB-to-printer cable converter. If you still experience problems after connecting the converter, try disabling the bi-directional feature of the printer. Note: Some parallel printers may not be supported. If you have access to a USB printer or a networked printer, make use of it. I want to set up my location to use the internal modem. To properly use your communications software (e.g., HyperTerminal), you need to set up your location: 1. Click on Start, Settings, Control Panel. 1. Double-click on Modems. 2. Click on Dialing Properties and begin setting up your location. Refer to the Windows manual. I get an error message from the PHDISK program. This is an error message that may appear when PHDISK is creating the Hibernation file. There are several different reasons that may cause this error: ❑ The size of the free disk space on your hard disk is less than the required size. For example, if the onboard memory is 32MB and the video