Adaptec 1405 User Guide - Page 46
Controller ID, UFI File Path, UPDATE, VERIFY, VERSION
View all Adaptec 1405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Appendix 10: Using the Adaptec Flash Utility for DOS ● 46 ● HELP (next section) ● LIST on page 46 ● SAVE on page 46 ● UPDATE on page 47 ● VERIFY on page 48 ● VERSION on page 48 HELP The HELP command displays a summary of AFU functions and command switches. Examples The following are the examples of command syntax that will display the help: A:\> AFU HELP A:\> AFU /? LIST The LIST command displays the AFU-supported SATA/SAS controllers installed on your computer. Use this command to see which SATA/SAS controllers are installed, and to identify the ID numbers assigned to each physical controller. You do not have to restart the computer after completing this command. Example This example shows a typical system response to a LIST command: A:\> AFU LIST Adaptec Flash Utility V1.0 (c)Adaptec Inc. 1999-2008. All Rights Reserved. Controllers Detected and Recognized: Controller #0 (03:01:00) ASC-1045/1405 SAVE The SAVE command saves the contents of a SATA/SAS controller's flash in a UFI file. The name of the UFI file is based on the SATA/SAS controller type and it cannot be modified. Command Syntax The command syntax for the SAVE command is as follows: AFU SAVE [/C] [/D ] Command Switches The following switches are available: ● /C is the SATA/SAS controller(s) IDs representing the set of controller(s) on which the command can be performed. By default, the AFU value set is Controller 0.