Adaptec 1405 User Guide - Page 51
Terminology Used in This Appendix, What is SAS?, SAS Expander Connections - hba
View all Adaptec 1405 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter A: Introduction to SAS l 51 Terminology Used in This Appendix For convenience, SATA/SAS controllers are referred to generically in this appendix as SAS controllers. HBAs, disk drives, and external disk drive enclosures are referred to as end devices and expanders are referred to as expander devices. SAS devices collectively refers to end devices and expander devices. What is SAS? Legacy parallel SCSI is an interface that lets devices such as computers and disk drives communicate with each other. Parallel SCSI moves multiple bits of data in parallel, using the SCSI command set. SAS is an evolution of parallel SCSI to a point-to-point serial interface. SAS also uses the SCSI command set, but moves multiple bits of data one at a time. SAS links end devices through direct-attach connections, or through expander devices. SAS controllers can typically support up to 128 end devices and can communicate with both SAS and SATA devices. You can add 128 end devices or even more with the use of SAS expanders. For more information, see SAS Expander Connections on page 54. Although you can use both SAS and SATA disk drives in the same SAS domain, Adaptec recommends that you not combine SAS and SATA disk drives within the same array or logical drive. The difference in performance between the two types of disk drives may adversely affect the performance of the array. Data can move in both directions simultaneously across a SAS connection (called a link-see next section). Link speed is 600 MB/sec in full-duplex mode. A SAS controller with eight links has a maximum bandwidth of 4800 MB/sec in full-duplex mode. Although they share the SCSI command set, SAS is conceptually different from parallel SCSI physically, and has its own types of connectors, cables, connection options, and terminology, as described in the rest of this chapter. To compare SAS to parallel SCSI, see page 55.