Adaptec 3210S User Guide - Page 32
Creating an Array Using the Wizard, Advanced, Create Array Wizard
![]() |
UPC - 760884138250
View all Adaptec 3210S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Adaptec Storage Manager Pro User's Guide To create an array using either method, you must perform the following tasks in sequence: 1 Create the array. See Creating an Array Using the Wizard on page 2-2 or Creating a Custom Array on page 2-4. 2 Make the array available for use. How you do this varies based on your operating system. See Making the Array Available for Use on page 2-13. Caution: You should not remove a disk drive that is used by an array. This may cause you to lose data. See Replacing a Failed Drive in an Array on page 3-1. For information describing each array type, see Array Types on page A-6. For information about selecting an array type, see Appendix B, Choosing Your Array Type. For information about creating a bootable array, refer to your controller's Installation Guide. Creating an Array Using the Wizard The Create Array Wizard guides you through determining the best array configuration settings for your needs, creates an array based on your selections, and uses all the available disk drives on the controller. If you want to select specific drives or customize the array, click Advanced to open the Create Array dialog box. To create an array using the Create Array Wizard: 1 In the System Browser window, select the controller where you want to create the array. 2 Click Create Array Wizard. The Create Array Wizard appears and guides you through the following array configuration criteria, each of which is defined in the Wizard: - Determine Fault Tolerance - Determine Array Performance: Array Stripe Size - Determine Array Performance: Array Cache Settings 2-2
![](/manual_guide/products/adaptec-2110s-user-guide-ebfacfc/32.png)