Adaptec 3210S User Guide - Page 94
Replacing Disk Drives, Storage Manager Pro displays the disk ID in the System Browser
UPC - 760884138250
View all Adaptec 3210S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Adaptec Storage Manager Pro User's Guide I Channel Number-Indicates to which channel (bus) on the controller the drive is attached. I SCSI ID-Identifies the drive on the SCSI channel. I Logical Unit Number (LUN)-The number assigned to a subdevice (logical unit) of a SCSI device, which is usually zero for a disk drive. ATA disk drives are identified by a disk ID displayed in the following format: 0:0 Channel Number Device ID I Channel Number-Indicates to which channel (bus) on the controller the drive is attached. I Device ID-Identifies the drive on the ATA channel. Storage Manager Pro displays the disk ID in the System Browser window and in the Disk Properties dialog box. Caution: You should not remove a disk drive that is used by an array. This may cause you to lose data. See Replacing a Failed Drive in an Array on page 3-1. Replacing Disk Drives You can replace a failed drive in an array. The steps you need to take to replace a drive in an array and have the best chance to retain your data depend on the exact situation. See Replacing a Failed Drive in an Array on page 3-1. Caution: You should not remove a disk drive that is used by an array. This may cause you to lose data. 8-2