Airlink AR570WV2 User Manual - Page 52
to save the settings and click
View all Airlink AR570WV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2) Configure the same channel for every router/AP. 3) Configure a unique different SSID for every router/AP in order to distinguish each unit on your wireless LAN. 4) Configure a static IP address for every router/AP. Make sure all IP addresses are based on the same subnet mask, and out of your DHCP client range. Parameters AP Mode Remote AP MAC Scanned AP's MAC Scan AP Description AP Only: WDS function is disabled. WDS Only: The router is functioning as a bridge to connect with other WDS enabled AP/Router. Wireless client is not able to connect to the router at WDS Only mode. Hybrid: The router is functioning as a bridge as well as an AP that allows wireless client association at the same time. (Note: the data throughput is halved with Hybrid mode.) Enter the MAC address of other WDS enabled AP/Router into MAC 1 ~ MAC4. This feature allows you to bridge up to 4 AR570Wv2 routers. It is suggested to use "Copy to" function to avoid any typo. Click on the drop-down menu to select an AP you wish to bridge to. Select a number from the drop-down menu of Remote AP MAC and click Copy to. The MAC address will be automatically filled into the corresponding MAC address field above. Click Scan AP to find the available wireless Router/AP that you wish to bridge. If the wireless router/AP is not showing in the list, it may be out of range, and you need to move it closer in order to build the bridge connection. After you finished all settings, click Save to save the settings and click Reboot. The change will take effect after rebooting the router. 48