Airlink AR570WV2 User Manual - Page 86

Configuration on Static Routing

Get Airlink AR570WV2 PDF manuals and user guides View all Airlink AR570WV2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

For Example: AR570Wv2 Configuration on Static Routing Destination Subnet Mask Gateway Hop 192.168.1.0 255.255.255.0 192.168.123.216 1 192.168.0.0 255.255.255.0 192.168.123.103 1 Enabled √ √ When Client3 wants to send an IP data gram to 192.168.0.2, it will use the above table to determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to 192.168.1.11, it will go via 192.168.123.216 Parameter Dynamic Routing Description Routing Information Protocol (RIP) will exchange information about destinations for computing routes throughout the network. Please select RIPv2 only if you have different subnets in your network. Otherwise, please select RIPv1 if you need this protocol. 82

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
82
For Example:
Configuration on Static Routing
Destination
Subnet Mask
Gateway
Hop
Enabled
192.168.1.0
255.255.255.0
192.168.123.216
1
√
192.168.0.0
255.255.255.0
192.168.123.103
1
√
When Client3 wants to send an IP data gram to 192.168.0.2, it will use the above table to
determine that it has to go via 192.168.123.103 (a gateway), and if it sends packets to
192.168.1.11, it will go via 192.168.123.216
Parameter
Description
Dynamic Routing
Routing Information Protocol (RIP) will exchange information
about destinations for computing routes throughout the network.
Please select RIPv2 only if you have different subnets in your
network. Otherwise, please select RIPv1 if you need this
protocol.
AR570Wv2