Alpine HCE-C305R Owners Manual - Page 15

Camera 0 eration Changing the Rear Image Configuration 1 Press VIEW. The image configuration changes every time VIEW is pressed. Rear View Operation is carried out by pressing the switch, or shifting the gear lever. The following settings may be required depending on the connected navigation/monitor. • Rear camera connection: ON setting Setting to ON is required to display the camera image on the navigation/monitor. • Camera guidelines display: OFF setting This camera system has its own, calibrated guidelines. It is not necessary to display the guidelines found in the navigation/monitor system being used. • Refer also to the owners manual of the product to connect. Turning the Rear Camera On and Off Panorama View Corner View Ground View Displaying the rear image by shifting the gear lever 1 Shift the gear lever to the reverse position (backing up). The video image behind the car and the audible warnings depends upon the gear shift position. 2 If you shift the gear lever to a position other than reverse (backing up), the monitor returns to the previous screen. • Refer also to the Owners Manual of the connected monitor/navigation system. • Be sure to also check behind and around the car visually. Use the camera image to assist in showing conditions behind and around the car. • Depending on where the unit is installed, actual conditions may differ from the displayed image. 14-EN