Alpine HCE-C305R Owners Manual - Page 7

Cautions Regarding Object Detection Function This camera system is designed to help the driver make safe driving decisions. It must not replace a thorough, visual inspection around the vehicle by the driver, before proceeding. • This system cannot detect every object within range ofcoming in contact with your vehicle. • This camera distorts object size and distance from the vehicle. We are not responsible for any accidents caused by driver misjudgement or conclusions based on objects seen or unseen by this system. This system uses the camera's image to detect moving objects. Therefore, only objects seen by the camera are detectable. There be times when a false warning is given with no moving object in the display. In other cases, no warning at all is given although moving vehicles are visible in the display. In addition, a warning may not be given or may be delayed in the following cases or for the following objects. • Object out of the camera's scope Your vehicle x·--· 0 • Objects approaching from directly behind • When both the vehicle and objects are motionless - Motionless objects are difficult to detect. Therefore, there may be cases where a warning is not given or the distance is not correct. Be sure to perform a visual check. • Road paint (for example, crosswalks), tire chocks, curbstones • Thin objects (for example, cones and poles) • Low objects (for example, infants, children and small bicycles/tricycles) • Large objects (for example, concrete block walls and guardrails) • Objects not within 3. 7 m behind the vehicle • Objects approaching from a slope 6-EN