Alpine HCE-C305R Owners Manual - Page 30
sure that the sheet
View all Alpine HCE-C305R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
This completes the affixing of the calibration sheet on the right tire side. Affix a calibration sheet to the left tire side in the same way. • For the left tire side, when affixing the calibration sheet to the external box, align the corner of the "LEFT TIRE" side of the calibration sheet and the corner of the bottom surface of the external box, making sure that the sheet and box line up straight, and affix with adhesive tape. • The left and right calibration sheets must be affixed in a parallel fashion. Measure the widths between the sheets for the area directly underneath the bumper and the sheet edges, and make sure they are within ±5 em (1.97"). 3 Measure the camera installation location {Depth, Height, Offset). {1) Stack the external box and internal box and place them so they are up against the car in the vicinity of the center of the rear bumper. Interior box External box {2) Measure numeric values in 3 places. Camera Depth L 7 ' C ] • -i Offset • • Depth: Measure the length from the camera to the box. Height: Measure the height from the ground to the camera. Offset Measure the length from the center of the vehicle to the camera. • Write the measured values down for reference. 4 Stretch the measuring tape until it reaches both the left and right calibration sheets and place it on the ground so that it aligns with the inside of the box. • Place the measuring tape so that it touches the exact same measure mark on both the left and right calibration sheets. External box/ Interior box Height Tape measure 29-EN