Alpine HCE-C305R Owners Manual - Page 24

Switched Power Lead Ignition

Get Alpine HCE-C305R PDF manuals and user guides View all Alpine HCE-C305R manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

CD Power cable ® Switched Power Lead (Ignition) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position. @ Battery Lead Connect this lead to the positive(+) post of the vehicle's battery. @Fuse 7.SA ® Ground Lead Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. ® Reverse Input Lead Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the rearview camera. This is achieved by putting the car into reverse (R). (J) Camera Control Lead Use to connect with products that do not have the camera screen display function other than the linkage with the gear lever shifted into the reverse position (R). ® Video Output Connector (Yellow) Connects to the Video Input Connector when connecting with the navigation or monitor that has no direct camera input connector. ® Switch Connector @) Buzzer Connector @ Rear Camera Input Connector @ SETUP switch (ON/OFF) Use this switch when calibration is performed. 23-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
CD
Power cable
®
Switched Power Lead (Ignition)
Connect this lead
to
an
open terminal on the
vehicle's fuse box or another unused
power
source which provides (+)12V only
when
the ignition
is
turned on or in the accessory
position.
@
Battery Lead
Connect this lead
to
the positive(+) post
of
the vehicle's battery.
@Fuse
7.SA
®
Ground Lead
Connect this lead
to
a
good
chassis ground on
the vehicle. Make
sure
the connection
is
made
to
bare metal and
is
securely fastened using
the sheet metal screw provided.
®
Reverse
Input
Lead
Connect
to
the plus side
of
the
car's
reverse
lamp that lights when the transmission
is
shifted
into
reverse
(R).
Switches the video picture
to
the rearview
camera. This
is
achieved by
putting
the car
into
reverse
(R).
(J)
Camera Control Lead
Use
to
connect
with
products that
do
not
have the camera screen display function other
than the linkage
with
the gear lever shifted
into
the reverse position
(R).
®
Video
Output
Connector (Yellow)
Connects
to
the Video Input Connector
when
connecting
with
the navigation or
monitor
that
has
no direct camera
input
connector.
®
Switch Connector
@)
Buzzer Connector
@
Rear Camera
Input
Connector
@
SETUP switch (ON/OFF)
Use
this switch when calibration
is
performed.
23-EN