Alpine X409-WRA-JL Navigation Users Manual - Page 73
Button, Description, Function
![]() |
View all Alpine X409-WRA-JL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4.3.1.1 Vehicle profile You can select the following vehicle types: Button Description Maneuver restrictions and directional constraints are taken into account when planning a route. Roads are used only if access for cars is allowed. Private roads and resident-only roads are used only if they are inevitable to reach the destination. Walkways are excluded from routes. All maneuvers are available in intersections. One-way streets are taken into account so that driving in the opposite direction is allowed at low speed. A private road is used only if the destination is there. Walkways are excluded from routes. Maneuver restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for buses is allowed. Private roads, resident-only roads and walkways are excluded from routes. Maneuver restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for taxis is allowed. Private roads, resident-only roads and walkways are excluded from routes. Maneuver restrictions and one-way streets are taken into account when planning a route. Roads are used only if access for trucks is allowed. Private roads, resident-only roads and walkways are excluded from routes. U-turns are excluded from routes (turning back on a divided road is not considered as a U-turn). If the map contains data on dimension, weight and freight restrictions, they can also be taken into account when planning a route. Creating a profile makes it possible to set up vehicle parameters used in route planning. You can have several profiles for the same vehicle. To add a new vehicle profile, perform the following steps: 1. Tap , browse the list of vehicles, and tap . 2. Select the vehicle type and set the parameters below. Depending on the vehicle type, some parameters may not be available in the list. You can set the following parameters: Button Function 73
![](/manual_guide/products/alpine-x409wrajl-navigation-users-manual-bf6c71e/73.png)