Apple MB321LL User Guide - Page 29

If you selected Share a range of IP addresses using only DHCP when you set up

Get Apple MB321LL - AirPort Express Base Station PDF manuals and user guides
UPC - 885909200979
View all Apple MB321LL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

• If you selected "Share a range of IP addresses (using only DHCP)" when you set up the base station's network, you can provide Internet access to client computers by setting the client IP addresses manually. Select "Use the following IP address." When you configure clients manually for a base station that provides NAT service, use IP addresses in the range 10.0.1.2 to 10.0.1.200, 172.16.1.2 to 172.16.1.200, or 192.168.1.2 to 192.168.1.200. In the "Subnet mask" field, enter 255.255.255.0. In the "Default gateway" field, enter 10.0.1.1, 172.16.1.1, or 192.168.1.1, depending on which addressing scheme you used. Enter the same name server address and search domain information that you entered in the base station configuration. Chapter 3 AirPort Network Designs 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Chapter 3
AirPort Network Designs
29
•
If you selected “Share a range of IP addresses (using only DHCP)” when you set up the
base station’s network,
you can provide Internet access to client computers by setting
the client IP addresses manually. Select “Use the following IP address.”
When you configure clients manually for a base station that provides NAT service, use
IP addresses in the range 10.0.1.2 to 10.0.1.200, 172.16.1.2 to 172.16.1.200, or 192.168.1.2 to
192.168.1.200.
In the “Subnet mask” field, enter 255.255.255.0. In the “Default gateway” field, enter
10.0.1.1, 172.16.1.1, or 192.168.1.1, depending on which addressing scheme you used.
Enter the same name server address and search domain information that you
entered in the base station configuration.