Arlo Pro 2 User Manual - Page 38
Restart the base station, Select the siren volume, Turn the siren on and off using the Arlo app
View all Arlo Pro 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Change Your Settings The firmware level, hardware level, and serial number for the base station display. Restart the base station 1. Open the Arlo app. 2. Tap Settings > My Devices. 3. Tap the base station. 4. Tap Restart. The base station restarts. Select the siren volume The base station includes a siren. You can manually activate or turn off the siren. You can also set up motion detection rules to trigger the siren and select the siren volume level when you set up the rule. WARNING: The loudest siren setting, which is the default loudness option for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage. The base station siren settings are Loud, Very Loud, and Extremely Loud. Turn the siren on and off using the Arlo app WARNING: The loudest siren setting, which is the default loudness option for the siren, is more than 100 decibels. Do not test the siren while people or pets are close to the base station. Prolonged exposure to the siren might cause hearing damage. 1. Open the Arlo app. 2. Tap Turn Siren ON. 3. Tap Yes to confirm that you want to turn on the siren. Note: The siren loudness is determined by the loudness of the siren trigger rule for whichever mode is currently active on the base station. If the active mode doesn't use any siren trigger rules, the siren defaults to its loudest setting. 38