Arlo Pro 3 User Manual - Page 42

Pro 3 Wire-Free Security Camera System The device location displays as either In Zone, Out of Zone, or Unavailable (if there's an issue contacting that device). 7. To disable geofencing, tap the mobile device again. The check mark disappears when geofencing is disabled. For more information, see Set up geofencing on page 38. Custom modes You can add modes in addition to the modes that come with the Arlo app and give the new modes custom names, such as Vacation. You can create one rule for each mode. You can create multiple rules within the same mode so that each camera performs different actions and sends different alerts. You can also use Schedule mode to activate modes automatically at different times of the day or week. (See Schedule your camera rules on page 37.) Add a mode 1. Open the Arlo app. 2. Tap Mode. 3. Tap the SmartHub. 4. Tap Add a Mode. 5. Enter the mode name and tap Next. 6. Select the trigger device and tap Next. This is the camera that detects motion and/or sound. 7. Enter the trigger device settings for the When motion is detected and When audio is detected sections and then tap Next. 8. Use the slider to set the motion sensitivity for the trigger device and tap Next. Higher motion sensitivity settings usually trigger your camera to capture videos more frequently. 9. Set the audio sensitivity for the trigger device and tap Next. 10. Select an action device and tap Next. Modes, Rules, and Alerts 42 User Manual