Arlo Pro 3 User Manual - Page 46

Pro 3 Wire-Free Security Camera System Test the Alarm Detection range After a successful compatibility test, we recommend that you test the Alarm Detection range when you move your camera to a different location. 1. Place your Arlo Pro 3 Camera in the desired location. 2. Open the Arlo app. 3. Make sure that your Pro 3 Camera is in Armed mode or another mode in which it can detect sound and motion. 4. Make sure that you selected Smoke/CO Alarm in the Audio Alerts setting for your camera and that Other Audio is turned off. 5. Close the Arlo app, but don't log out. 6. Use the test button on your smoke or carbon monoxide detector to activate the alarm for 30 seconds. 7. After a successful test, aim the camera toward the area of highest interest so that you can view the relevant videos when you get a notification. Turn off audio detection Audio detection must be turned on if you're using audio alerts so that your camera wakes up when there is a sound. To turn off audio detection, you must first turn off Audio Alerts. 1. Open the Arlo app. 2. Tap Settings > Smart Notifications. 3. Select a camera. 4. In the Audio Alerts section, deselect the slider next to Smoke/CO Alarm and All Other Audio settings. 5. Return to Settings. 6. Tap Smart Notifications, and deselect the slider next to Detects Audio. Turn off push notifications after using audio detection Push notifications must be turned on when you're using Arlo Smart audio detection. After you turn off audio detection and audio alerts, you can edit rules to turn off push notifications. (See Turn off audio detection and audio alerts on page 46.) Modes, Rules, and Alerts 46 User Manual