Asus T2-AH1 T2-AH1 English user manual E2065 - Page 29
Installing a DIMM
View all Asus T2-AH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2.6 Installing a DIMM The system motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. The following figure illustrates the location of the sockets: DIMM_B1 DIMM_A1 ® 104 Pins 80 Pins 184-pin DDR DIMM sockets 2.6.1 Memory configurations You may install up to 2 GB system memory using 256 MB, 512 MB, and 1 GB DDR DIMMs. • Installing DDR DIMMS other than the recommended configurations may cause memory sizing error or system boot failure. Use any of the recommended configurations in the table on the next page. • Install only i d e n t i c a l (the same type and size) DDR DIMM in DIMM_A1 and DIMM_B1. • If installing only one DDR DIMM, install it in DIMM_A1 (blue slot). • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to chipset resource allocation, the system may detect less than your total system memory size when you enable the onboard VGA. • This motherboard does not support memory modules made up of 128 Mb chips or double-sided x16 memory modules. ASUS T2-AH1 2-9