Asus T2-AH1 T2-AH1 English user manual E2065 - Page 79
a gray connector for an Ultra DMA 100/66 IDE master device hard disk
View all Asus T2-AH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
7. IDE connector (40-1 pin IDE) This connector is for an Ultra DMA 100/66 signal cable. The Ultra DMA 100/66 signal cable has three connectors: a blue connector for the primary IDE connector on the motherboard, a black connector for an Ultra DMA 100/66 IDE slave device (optical drive/hard disk drive), and a gray connector for an Ultra DMA 100/66 IDE master device (hard disk drive). Refer to the hard disk documentation for the jumper settings. • Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA cable connector. This prevents incorrect insertion when you connect the IDE cable. • Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices. ® IDE NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1. PIN 1 IDE connector 8 . Internal audio connectors (4-pin AUX, CD) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. AUX CD (White) (Black) ® Right Audio Channel Ground Left Audio Channel Right Audio Channel Ground Left Audio Channel Internal audio connectors ASUS T2-AH1 4-7