Asus T2-AH1 T2-AH1 English user manual E2065 - Page 43
For Serial ATA HDDs with - sata
View all Asus T2-AH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
To install a Serial ATA hard disk drive: 1. Follow steps 1-7 of the previous section. 2. Connect one end of the supplied 7-pin SATA cable (right angle side) to the SATA connector at the back of the drive, then connect the other end to a SATA connector on the motherboard. See page 4-8 for 2 the location of the Serial ATA connectors. 3a 3. For Serial ATA HDDs with a 4-pin power connector: a. Connect a 4-pin (female) power plug from the power supply unit to the 4-pin (male) power connector at the back of the drive. See page 2-25 for details on the power supply unit plugs. For Serial ATA HDDs without a 4-pin power connector: b. Connect the 15-pin SATA power adapter plug to the power connector at the back of the drive, then connect the other end (4-pin male) to a 4-pin (female) power plug from the power supply unit. See page 2-25 for details on the power supply unit plugs. 3b 2 4-pin (male) power plug 15-pin SATA power plug If your Serial ATA HDD has both 4-pin and 15-pin connectors at the back, use either the 15-pin SATA power adapter plug O R the legacy 4-pin power connector. D O N O T use both to prevent damage to components and to keep the system from becoming unstable. ASUS T2-AH1 2-23