Autodesk 00128-051462-9310 User Guide - Page 1063

Using Anchors to Change the Position of a Door Within a Wall Use this procedure to change the position of doors horizontally within a wall to which the doors are anchored. Door position along the Y axis parameters 1 Select the doors you want to change, and double-click one of them. 2 On the Properties palette, expand Basic, and expand Location. 3 Click Anchor. 4 Select the reference point for the anchor along the Y axis: If you want to... Then... use the left edge of the wall as your reference point select Left edge of wall (curve) width for From. use the center of the wall as your reference point select Center of wall (curve) width for From. use the right edge of the wall as your reference point select Right edge of wall (curve) width for From. 5 Enter the distance from the reference point at which to place the doors. Use a negative value to measure from endpoint to start point. 6 Select the position of the doors to measure to: If you want to... measure to the front of the doors Then... select Front for To. measure to the center of the doors select Center for To. measure to the back of the doors select Back for To. 7 Click OK. Changing the Orientation of a Door to a Wall Use this procedure to change the vertical orientation of doors in a wall to which the doors are anchored. 1 Select the doors you want to change, and double-click one of them. 2 On the Properties palette, expand Basic, and expand Location. 3 Click Anchor. 4 Enter the X and Z rotation angles of the doors. 5 Indicate if you want to reverse the flip direction of the doors in the X, Y, and Z axes: If you want to... Then... reverse the direction the doors open to select Flip X. Using Anchors to Change the Position of a Door Within a Wall | 1023