Autodesk 00128-051462-9310 User Guide - Page 1781

Calculating Spaces Based on the DIN 277 Standard DIN 277 is the standard for Germany and German-speaking countries. The DIN 277 standard included in AutoCAD Architecture includes the subset of DIN 277 rules that are described in the following sections: Space Classifications in DIN 277 Spaces are classified in 3 major classification groups: Classification A Definition ■ has roof ■ fully enclosed by walls or curtain walls on all sides ■ the wall or curtain wall is as high or higher than the space=full height enclosure B ■ has roof ■ partially enclosed by walls or curtain walls ■ at least one wall or curtain wall is lower than the space=partial height enclosure C ■ no roof Exterior ■ exterior space Classification NetArea Type_DIN Utilized Technical Circulation Use Living, office, production, craft, experiments, storage, sale, education, culture, health care, other uses Operations, mechanical room, water supply, heating room, electrical room, etc. Halls, corridors, stairs, elevators, etc. Net Area The net boundaries are created on the inside of the walls. Technical spaces: When the area of a technical space is larger than or equal to 1 m2, the net boundary will be calculated to the inside of the wall. When the area of a technical space is smaller than 1 m2, the space will not have a net boundary, and the area will be calculated as constructive area. Calculating Spaces Based on the DIN 277 Standard | 1741