Autodesk 00128-051462-9310 User Guide - Page 999

5 Select the individual cells, bay, column, or nested grid to modify the cell assignment by hovering over a cell or pressing TAB, and press ENTER. Press CTRL to select multiple cells, bays, columns or nested grids. The Edit Cells worksheet displays. 6 Edit the cell for the selected grid: If you want to... Then... assign an infill to selected cells select Assign Infill and select an infill definition. Clear Replace Cell and click OK. replace the selected cells with a new infill select Assign Infill and select an infill definition. Select Replace Cell and click OK. create and assign a new infill to the selected cells click and specify values on the Design Rules worksheet. For more information, see "Assigning Infills to Door and Window Assembly Cells" on page 937. divide the selected cells with divisions, infills select Subdivision. or frames add a division to the subdivided cells select a division definition. create and assign a new division to the selected cells click and specify values on the Design Rules worksheet. For more information, see "Assigning a Division to a Door and Window Assembly Grid" on page 936. select an infill for the subdivided cells create and assign a new infill to the subdivided cells select an infill definition. click and specify values on the Design Rules worksheet. For more information, see "Assigning Infills to Door and Window Assembly Cells" on page 937. select a frame definition for the grid created select the frame definition and click OK. after the cell is subdivided specify the location of frames on the grid created after the cell is subdivided select Top, Bottom, Left, Right for Frame Location and click OK. Using Overrides in Door and Window Assemblies | 959