Autodesk 00128-051462-9310 User Guide - Page 1746

Detaching Spaces and Zones from Zones Use this procedure to detach spaces and zones from a zone. You can detach only directly attached spaces or zones. 1 Select the zone from which you want to detach a space or zone. 2 Detach the space or zone in one of the following ways: ■ Click the Detach (Minus) grip on the connection line to the attached space or zone. ■ Right-click, and click Detach Spaces/Zones. Then select the space or zone you want to detach from the zone, and press ENTER. Selecting Spaces and Zones Attached to a Zone Use this procedure to select the spaces and zones that are attached to a zone. 1 Select a zone that has zones or spaces attached to it. 2 Right-click, and click Select Attached Spaces/Zones. The spaces and zones that are attached to the zone are selected in the drawing. NOTE Spaces and zones that are located in an external reference will be highlighted, but not selected. Editing Zones You can use either of the following methods to change zone properties such as the ones that control the allowed content for the zone, the types of calculation performed, and the calculation modifiers applied: ■ You can change zone settings on the Properties palette. ■ You can select editing commands from the context menu for a selected zone. Renaming a Zone Use this procedure to rename a zone. If a list definition has been attached to the zone style, you can choose a name from the list. A list definition can either be restrictive and allow only names selected from the list, or it can allow you to enter a name of your choice. For more information, see "List Definitions" on page 1695. 1 Double-click the zone you want to rename. 2 On the Properties palette, expand Basic, and expand General. 3 For Name, do one of the following: ■ Select a name from the list. ■ Enter a name. 1706 | Chapter 36 Spaces