Autodesk 00128-051462-9310 User Guide - Page 365

■ 5 = Details ■ 6 = Schedules and Diagrams ■ 7 = User Defined ■ 8 = User Defined ■ 9 = 3D Representations (Isometrics, Perspectives and Photographs) Examples: ■ A-101 - (Architectural First Floor Plan) ■ A-102 - (Architectural Second Floor Plan) ■ A-103 - (Architectural First Floor Reflected Ceiling Plan) ■ A-201 - (Architectural Building Elevations) ■ A-301 - (Architectural Building Sections) Here again, the codes are very broad, so it is certainly possible on a big project to run out of numbers. Many firms develop similar systems of naming, but conceptually they are usually very consistent with these. One factor to consider, while there is neither a functional nor philosophical reason why existing sheet file naming in your firm cannot simply be adopted, the integration of the Sheet Set Manager within Project Navigator introduces some hard-coded assumptions about sheet file naming that may be different than your current system. When you name a new sheet on Project Navigator's Sheets tab, you input both the sheet number and the sheet title. These two values, which will ultimately feed two different fields on the title block, are by default concatenated together to form the sheet file name. It is likely that this is in variance to how you name sheets today. Whether or not it will prove problematic is another matter. In most cases it is arguable that this change in naming will have little to no impact on your work flow or process. Considering the level of automation that Sheet Set manager provides, give this new approach some serious consideration before adopting a contrary policy that may actually prove harder to manage. Understanding Constructs Included in the Commercial Template Project All constructs included in the Commercial Template Project are suggestions of typical commercial project organization. Feel free to modify the arrangement to suit your specific project needs and add or delete files as needed. Some files may contain geometry; these are placeholders that are meant to be erased by project team members prior to beginning work. Simply erase the geometry, and draw actual project geometry in its place. For example, the Typical Toilet Room element file contains a rectangle, and many files include a Live Area Guide block insertion. General Considerations for all Constructs Typically there will be at least one construct for each level and/or division (if used). However, there will often be many more than that. Project and team member requirements will be a determining factor in shaping the exact quantity and makeup of the constructs on a per-project basis. Some projects will have many constructs per floor, while others might have only one per floor. Below is a brief description of each construct included in this Commercial Template Project. Feel free to add or delete them as required to meet your specific project and team needs. You can also make modifications to the Commercial Template Project and resave it as a custom template project for use in later projects. Terrain Construct This construct is intended for a simple terrain model of the project's site conditions. Use the mass element Drape tool (on the Massing palette - Design Tool Palette Group) to create such a terrain model from Polyline contours. For more information, see "Creating a Drape Mass Element" on page 583. Polylines can be imported from a civil engineer's file or simply drawn. Place each polyline at the height of the contour (you can do this easily on the Properties palette using the Elevation property). To carve away the footprint of the building from the terrain, you can use a Boolean operation, as described in "Combining Mass Elements Using Boolean Operations" on page 594. This will help sections display better later on. The Terrain construct is referenced in the Site Plan, Composite Model, Section and Elevation View files. Shell Construct Several shell constructs have been included into the Commercial Template Project: one for each floor of the building. These constructs are intended for the exterior enclosure of the building on each floor. Include walls, doors, windows, assemblies and curtain walls into the shell as necessary. All objects in these constructs ought to span only one floor. If you have a curtain wall that spans multiple floors, you should create a separate spanning Facade construct that includes a multi-level curtain wall object. To make a construct spanning, check more than one level or division. Although it Understanding Constructs Included in the Commercial Template Project | 325