Autodesk 00128-051462-9310 User Guide - Page 934

Viewing edit in-place grips for adding and removing bays 5 Edit the division: If you want to ... add a bay to the grid remove a bay from the grid change the start offset of the grid change the end offset of the grid change the spacing of bays manually edit the grid use a worksheet to edit the cell dimensions Then ... click the Add Bay grip. click the Remove Bay grip. select the Start Offset grip and move it to the position. select the End Offset grip and move it to the position. click the Auto Grid Bay Spacing grip and move it to the position. right-click and click Convert To Manual. You can manually add and remove gridlines, change the offsets, and change the position of individual gridlines. click the Set Fixed Cell Dimension Rules command grip, and edit the values in the worksheet. 6 Save or discard changes to the curtain wall unit grid: If you want to exit the in-place editing session ... without saving your changes after saving your changes Then ... click on the In-Place Edit toolbar. click on the In-Place Edit toolbar. If you edited the grid by instance, the changes are saved to the design rules for the individual grid. If you edited the curtain wall unit style, the Save Changes dialog box is displayed. 7 In the Save Changes dialog box, specify to which division to save the changes: If you want to ... Then ... save the changes to the style in the current curtain wall unit division verify the current division is selected for Save Changes to Existing Division, and click Save. The changes are made in the style and affect all curtain wall units of that style in the drawing. create an override to the style by saving the changes in a new curtain wall unit division click New, enter a name for the new division override, and click OK. Click Save. The changes are saved as an override to the style, and affect only the curtain wall units to which the override is applied. 894 | Chapter 19 Curtain Walls