Autodesk 00128-051462-9310 User Guide - Page 1138

13 Clean up the muntin intersections: If you want to... Then... convert the muntin intersections to corners under Muntin, select Clean Up Joints. convert all the muntins to one body with the joints cleaned under Muntin, select Convert to Body. up Specifying prairie-9 lights muntin cleanup joints 14 Under Lights, select Prairie-9 Lights for Pattern. 15 Enter a value for Edge X Offset to specify the horizontal distance of the muntins from the edges of the pane. 16 Enter a value for Edge Y Offset to specify the vertical distance of the muntins from the edges of the pane. Specifying prairie-9 lights pattern muntin edge X and Y offsets 17 Click OK. 18 Add additional muntins: If you want to add muntins to... another window sash in the window style another display representation all display representations of the selected window style Then... repeat this procedure from step 8. click OK, and repeat this procedure from step 5. select Automatically Apply to Other Display Representations and Object Overrides. 19 Click OK three times. After you add a muntins block to a window style, you can assign a material, such as wood, and specify display properties, such as color and linetype, for the muntins. For more information, see "About Window Display Components and Materials" on page 1084, "Specifying the Display Properties of a Window Style" on page 1086, and "Creating and Editing Material Definitions" on page 522 respectively. Adding Prairie-12 Lights Muntins to a Window Style Use this procedure to add prairie-12 lights muntins to a window style. You add the muntins by editing the display properties of the window style for a display representation, such as Model or Elevation, where you want the muntins to appear. You can add muntins to display representations individually. 1098 | Chapter 23 Windows