Autodesk 00128-051462-9310 User Guide - Page 1205

Multi-landing stair Landing Turn Point, Construction Line Location, Graphics Path Location, and Edit Edges grips 3 Move the stair to the desired location, and click once; or enter a value, and press ENTER. If you want to enter a specific value for the second direction in any edit mode (for example, in the Y direction when editing along the XY plane), press TAB to cycle to the second direction. You can also lock the movement of the stair along a specific direction. If you enter a value for either dimension direction in the current edit mode, and then press TAB, the movement of the stair is constrained to the second dimension direction. When editing along the XY plane, for example, you can enter a value for X dimension, and then press TAB. The X dimension is locked at that value, and movement of the stair is constrained to the Y dimension direction. 4 Right-click, and click Deselect All to turn off grips. Changing the Shape of Landings for Multi-Landing Stair 1 Select the multi-landing stair. 2 Select the Edit Edges grip. In order to edit the landing width, landing edges, and landing vertices, click the Edit Edges grip to access the edges edit mode. When you have finished editing the landing edges, click the Exit Edit Edges grip to return to the default stair edit mode. Using Grips to Edit Stairs | 1165