Autodesk 00128-051462-9310 User Guide - Page 1960

2 Click a start point in the drawing area to insert the component at the default orientation, or select one of the following options: If you want to... flip the component along its X axis Then... enter x (for Xflip), and then click to specify the starting point for the component. flip the component along its Y axis enter y (for Yflip), and then click to specify the starting point for the component. position the component to the left of enter l (for Left), and then click to specify the starting point for the component. the baseline when drawn vertically position the component to the right of enter r (for Right), and then click to specify the starting point for the component. the baseline when drawn vertically center the component on the baseline enter c (for Center), and then click to specify the starting point for the component. when drawn in any direction 3 Click the desired endpoint to insert the component. Corrugated sheet metal in end view Backfill Components Use this procedure to insert backfill detail components, such as gravel or soil, that are positioned within a boundary provided by existing linework or an existing object. In this example, the tool for inserting Undisturbed Soil has the View property set to Section, which is the only view available for this type of component. 1 Activate the detail component insertion tool for the component using any of the methods described under "Inserting Detail Components" on page 1918. 2 Select the object you want to be the boundary for the backfill. 3 Click within the boundary of the selected object to insert the backfill component. Backfill component inserted within polyline boundary 1920 | Chapter 43 Detail Components