Autodesk 00128-051462-9310 User Guide - Page 1277

4 Click the Stringers tab. If the style does not use stringers, proceed to step 6. 5 Add or remove stringers: If you want to... Then... add a stringer to the stair style click Add. add an identical stringer to the list select the stringer you want to duplicate, and click Copy. delete a stringer from the list select the stringer, and click Remove. 6 Specify the properties of each stringer: If you want to... specify the name of a stringer specify the type of stringer specify the alignment of a stringer specify the width of a stringer specify the offset of a stringer specify the flight waist specify the flight total specify the landing waist specify the landing total stop the stringer at a landing allow the stringer to continue under a landing specify mitered corners for a center stringer at a turn or landing Then... select the current name, and enter a new name. click the current Type, and select Saddled or Housed. click the current alignment, and select Align Left, Align Right, Center, or Full Width. enter a value for Width. enter a value for Offset. under Flight, enter a value for Waist. under Flight, enter a value for Total. under Landing, enter a value for Waist. under Landing, enter a value for Total. select Truncate for Cleanup. select Cleanup for Cleanup. clear Curve center stringer at turns 7 Click Slab for Type to edit the slab settings: If you want to... specify the thickness of the slab at flights Then... under Flight, enter a value for Waist. Specifying the Stringers of a Stair Style | 1237