Autodesk 00128-051462-9310 User Guide - Page 1300

Viewing railing Fixed Post Position and Lengthen grips Changing the Location or Position of a Railing 1 Select the railing. 2 Move the appropriate grip to change the location of the railing, its start point, or its endpoint. Reversing the direction of the Railing 1 Select the railing. 2 Click the direction grip (arrow grip). Adding a Post to a Railing Use this procedure to add a post to a railing. The post is placed at a selected point on the railing. Adding a post to a railing 1 Select a railing. 2 Right-click, and click Post Placement ➤ Add. 3 Select a location for a new post. 4 Press ENTER. Removing a Post from a Railing Use this procedure to remove posts you have added to railings. You can only remove fixed posts. You cannot remove dynamic posts. The manually added post closest to the selected point is removed from the railing. If two posts are equidistant from the selected point, the post closer to the starting point of the railing is removed. If the current first fixed post is removed, then the next post becomes the first fixed post. Likewise, if the current last fixed post is removed, then the next post from the last becomes the last fixed post. If all but one post is removed from a railing, then the sole remaining post becomes the first fixed post. 1 Select a railing. 2 Right-click, and click Post Placement ➤ Remove. 1260 | Chapter 26 Railings