Belkin F5D8631-4 User Manual - Page 74
Next to Con
View all Belkin F5D8631-4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Manually Configuring Network Settings 1 3. Next to "Configure" (2), if "Manually" is selected, your Modem Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to 2 enter this information into the Modem Router. 3 4 5 4. If not already set, at "Configure:", choose "Using DHCP Server". 6 This will tell the computer to obtain an IP address from the Modem Router. 7 8 9 5. Close the window. If you made any changes, the following window will appear. Click "Save". 10 Restart the computer. When the computer restarts, your network settings are now configured for use with the Modem Router. section EN-72
Manually Configuring Network Settings
EN-72
section
2
1
3
4
5
6
7
8
9
10
3.
Next to “Configure”
(2)
, if “Manually” is selected, your Modem
Router will need to be set up for a static IP connection type.
Write the address information in the table below. You will need to
enter this information into the Modem Router.
4.
If not already set, at “Configure:”, choose “Using DHCP Server”.
This will tell the computer to obtain an IP address from the
Modem Router.
5.
Close the window. If you made any changes, the following
window will appear. Click “Save”.
Restart the computer. When the computer restarts, your network
settings are now configured for use with the Modem Router.