Belkin F5D8631-4 User Manual - Page 76

Select the TCP/IP tab

Get Belkin F5D8631-4 PDF manuals and user guides View all Belkin F5D8631-4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Manually Configuring Network Settings 1 4. Select the "TCP/IP" tab (3). Next to "Configure" (4), you should see "Manually" or "Using DHCP". If you do not, check the PPPoE tab (5) to make sure that "Connect using PPPoE" is 2 NOT selected. If it is, you will need to configure your Modem Router for a PPPoE connection type using your user name and password. 3 4 5. If "Manually" is selected, your Modem Router will need to be set up for a static IP connection type. Write the address information in the table below. You will need to enter this information into 5 the Modem Router. 6 7 8 9 6. If not already selected, select "Using DHCP" next to "Configure" (4), then click "Apply Now". 10 Your network settings are now configured for use with the Modem Router. section EN-74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
EN-74
section
2
1
3
4
5
6
7
8
9
10
Manually Configuring Network Settings
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure”
(4)
, you should
see “Manually” or “Using DHCP”. If you do not, check the
PPPoE tab
(5)
to make sure that “Connect using PPPoE” is
NOT
selected. If it is, you will need to configure your Modem
Router for a PPPoE connection type using your user name and
password.
5.
If “Manually” is selected, your Modem Router will need to be set
up for a static IP connection type. Write the address information
in the table below. You will need to enter this information into
the Modem Router.
6.
If not already selected, select “Using DHCP” next to “Configure”
(4)
, then click “Apply Now”.
Your network settings are now configured for use with the
Modem Router.
EN-74