Brother International ™ QL-1050 Users Manual - English and Spanish - Page 10
CAUTION, WARNING, Power Cord, Cutter, Installation/Storage
View all Brother International ™ QL-1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4 Introduction WARNING Do not use paint thinner, benzene, alcohol or any other organic solvents to clean the machine. Doing so may cause damage to the surface finish. Use a soft, dry cloth to clean the machine. Do not put any heavy objects or objects containing water on top of the machine. If water or any foreign object enters the machine, contact the retail outlet where the machine was purchased or your local authorized service center. If you continue to use the machine with water or a foreign object in the machine, the machine may be damaged or personal injury could result. The electrical outlet should be close to the machine and be easily accessible. Do not touch the cutter. Personal injury could result. Do not expose the machine to direct sunlight or near heaters or other hot appliances, in any area exposed to extremely high or low temperatures, high humidity or dusty areas. Doing so could cause the machine to malfunction. Follow these guidelines to avoid fire, electric shock, or other damage. Power Cord Use only the authorized power source (120V AC) for the machine. Use only the power cord included with the machine. Do not handle the power cord or plug if your hands are wet. Do not overload the electrical outlet sockets with too many appliances or plug the power cord into a damaged electrical outlet. Do not cut, damage, alter or place heavy objects on the power cord. Cutter Do not use the power cord if it is damaged. Ensure the power cord is correctly inserted into the electrical outlet. Always hold the power cord when unplugging the power cord from or plugging it into electrical outlet. Do not pull on the power cord. The wire in the electrical cord may become damaged. If the machine will not be used for an extended period, remove the power cord from the electrical outlet. Do not touch the blade of the cutter. Do not open the top cover when the cutter is operating. CAUTION Follow these guidelines to avoid fire, electric shock, or other damage. Installation/Storage Put the machine on a flat, stable surface such as a desk. Do not put any heavy objects on top of the machine.