Brother International HL-3400CN Network Users Manual - English - Page 108
PATHWORKS for Macintosh Configuration, CREATE PORT LTA53:/APPLICATION
UPC - 012502526223
View all Brother International HL-3400CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
CHAPTER 9 LAT NETWORK CONFIGURATION PATHWORKS for Macintosh Configuration If you are using PATHWORKS for Macintosh, you will need to make sure that you have a bi-directional channel (in other words, you did NOT enter the command SET SERVICE servicename RECEIVE ENABLED from the remote console). Then create a LAT port using LATCP as shown in the following example (sub-stitute your actual node name and LAT port number): CREATE PORT LTA53:/APPLICATION SET PORT LTA53:/NODE=BRN_009C53/PORT=P1 Do not set the LAT port as a spooled device. Now go into ADMIN/MSA and enter the command: ADD PRINTER name/QUEUE=queuename/DEST=LTA53: where name is the name of the printer, and queuename is the queue name. 9-9
CHAPTER 9 LAT NETWORK CONFIGURATION
9-9
PATHWORKS for Macintosh Configuration
If you are using PATHWORKS for Macintosh, you will need to make sure that you
have a bi-directional channel (in other words, you did NOT enter the command SET
SERVICE servicename RECEIVE ENABLED from the remote console). Then
create a LAT port using LATCP as shown in the following example (sub-stitute your
actual node name and LAT port number):
CREATE PORT LTA53:/APPLICATION
SET PORT LTA53:/NODE=BRN_009C53/PORT=P1
Do not set the LAT port as a spooled device. Now go into ADMIN/MSA and enter
the command:
ADD PRINTER name/QUEUE=queuename/DEST=LTA53:
where name is the name of the printer, and queuename is the queue name.