Brother International Innov-ís 2800D Users Manual - English - Page 123
Attaching Embroidery Foot U
View all Brother International Innov-ís 2800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Attaching Embroidery Foot "U" BEFORE EMBROIDERING e Use the included screwdriver to loosen the presser foot holder screw, and then remove the presser foot holder. CAUTION • When attaching a presser foot, always press in the operation panel. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use embroidery foot "U" when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Press the "Needle Position" button to raise the needle. a bc a Presser foot holder b Screwdriver c Presser foot holder screw f Attach embroidery foot "U" so that the presser foot holder screw fits into the notch in the foot. b Press . * Make sure that embroidery foot "U" is vertical when it is installed. 5 Embroidery → The Presser foot/Needle exchange screen appears and all keys and operation buttons are locked. c Raise the presser foot lever. g Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw. d Press the black button on the presser foot holder to remove the presser foot. a b a Black button b Presser foot holder CAUTION • Use the included screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the presser foot and possibly cause injury. h Press , or that appeared. in the screen → All keys and operation buttons are unlocked, and the previous screen is displayed. 121