Brother International Innov-ís 2800D Users Manual - English - Page 208

ERROR MESSAGES This message is displayed when a button on the screen is pressed while the needle is lowered. This message is displayed when a large-size embroidery pattern is selected in Embroidery Edit mode. This message is displayed when the needle plate is removed with the machine on or when the singlehole needle plate is installed when the machine is turned on in the embroidery or embroidery edit mode. This message is displayed when an error occurs with the USB media. This message is displayed when you try to use incompatible media. This message is displayed when you try to retrieve or save a pattern while no USB media is loaded. 206 This message is displayed while the USB media is transmitting. This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This message is displayed when the "Start/Stop" button, "Reverse/ Reinforcement Stitch" button, or the "Thread Cutter" button is pressed while the presser foot and the needle are raised. This message is displayed when the "Start/Stop" button is pressed while the sewing speed controller is set to control the zigzag stitch width. ■ Alarm If an incorrect operation is performed, the machine beeps two or four times. Memo To turn the alarm on or off, press details, see page 21. . For