Brother International Innov-ís 2800D Users Manual - English - Page 61

SEWING THE STITCHES e Pull the bobbin threads to create the desired amount of gathering, and then tie the threads. d Lay both seam allowances on the side of the shorter one (cut seam allowance) and iron them flat. a f Smooth the gathers by ironing them. a Wrong side of fabric e Fold the longer seam allowance around the shorter one, and then sew along the edge of the fold. 3 Utility Stitches g Sew along the seam line, and then remove the basting stitch. Flat Fell Seams a a Use flat fell seams to reinforce seams and finish edges neatly. a Press , and then attach presser foot "J". b With the surfaces of the two pieces of fabric facing each other, sew the seam line, and then cut off half the seam allowance from the side on which the flat fell seam will lie. * If the automatic reverse/reinforcement stitching and automatic thread cutting settings are selected before sewing, reverse stitches will automatically be sewn at the beginning and end of the stitching and the thread will be cut. a a Wrong side of fabric Finished flat fell seam a a a Surface of fabric b a About 12 mm (approx. 1/2 inch) b Wrong side of fabric c Spread out the fabric along the seam line. ab a Wrong side of fabric b Seam line 59