Brother International Innov-ís 2800D Users Manual - English - Page 15

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Part Code No. Part Name U.S.A./ Canada Others 1 Embroidery foot "U" XD0313-051 2 Buttonhole foot "A" X57789-151 3 Overcasting foot "G" XC3098-051 4 Monogramming foot "N" X53840-351 5 Zipper foot "I" X59370-051 6 Zigzag foot "J" (on machine) XC3021-051 7 Blind stitch foot "R" X56409-051 8 Button fitting foot "M" 130489-001 9 Walking foot SA140 F033N:XC2214-102 10 Side cutter foot SA177 F054:XC3879-002 11 Free-motion quilting foot SA129 F005N:XC1948-002 12 Straight stitch foot XD0826-051 13 Straight stitch needle plate XC8362-051 14 Seam ripper 15 Bobbin × 10 X54243-051 SA156 SFB:XA5539-151 16 Needle set X58358-051 17 Twin Needle X59296-151 18 Scissors XC1807-121 19 Chalk pen 184944-001 20 Cleaning brush X59476-051 21 Eyelet punch 135793-001 22 Screwdriver (large) XC8349-021 23 Screwdriver (small) X55468-021 24 Spool cap (small) 130013-154 25 Spool cap (medium) × 2 X55260-153 26 Spool cap (large) 130012-054 27 Vertical spool pin XC8619-051 28 Spool felt X57045-051 29 Disc-shaped screwdriver XC1074-051 30 Spool net XA5523-050 31 Embroidery frame set (medium) 10 cm (H) × 10 cm (W) (4 inches (H) × 4 inches (W)) SA438/ EF74 EF74:XC8480-152 Embroidery frame set (large) 32 18 cm (H) × 13 cm (W) (7 inches (H) × 5 inches (W)) SA439/ EF75 EF75:XC8481-152 Embroidery frame set 33 (extra large) 26 cm (H) × 16 cm (W) (10-1/4 inches (H) × SA441/ EF81 EF81:XC9763-152 6-1/4 inches (W)) 34 Foot controller XC8028-051 35 Embroidery needle plate cover XA9939-051 36 Grid sheet set SA507 GS3:X81277-151 37 Touch pen (stylus) XA9940-051 38 Knee lifter XA6941-052 39 USB cable Alternate bobbin case 40 (no color on the screw*) (See page 141) 41 Embroidery bobbin thread 42 Stabilizer material XD0745-051 XC8167-451 SA-EBT SA519 EBT-CEN: X81164-001 BM3:XE0806-001 43 Operation Manual XD0954-151 44 Quick Reference Guide XD0956-051 45 Hard case XC9640-151 46 Embroidery unit carrying case SA529 D6EUC:XC9862-052 * Depending on the model, an alternate bobbin case with a pink marking may be included. It can be used in the same way as the bobbin case with no color marking on the screw. Memo (For U.S.A. only) Foot controller: Model S This foot controller can be used with this machine model NV2500D/NV2500/NV2800D. Memo • Always use accessories recommended for this machine. • The screw for the presser foot holder is available through your authorized dealer (part code: XA4813-051). • This operation manual and the foot controller can be stored in the machine's hard case. 13