Brother International Innov-ís 2800D Users Manual - English - Page 203

ERROR MESSAGES ERROR MESSAGES If the "Start/Stop button" or the "Reverse/Reinforcement Stitch" button is pressed before the machine is correctly set up or if an incorrect operation is performed, the machine stops and informs you of the error with an alarm and an error message. If an error message appears, correct the problem according to the instructions in the message. (The message that is displayed can be cancelled either by pressing or performing the operation correctly.) This message is displayed if a malfunction occurred. This message is displayed when the "Start/Stop" button is pressed, but the embroidery unit is not attached. This message is displayed when the "Start/Stop" button is pressed in embroidery mode, but the embroidery frame is not attached. This confirmation message appears after the machine is turned on and the carriage of the embroidery unit has moved to its initial position. This message is displayed when the pattern selected in embroidery mode is larger than the embroidering area of the small embroidery frame while the small embroidery frame is attached. This message is displayed when the pattern selected in embroidery mode is larger than the embroidering area of the large embroidery frame while the small, medium or large embroidery frame is attached. This message is displayed when there are too many characters to be arranged in the curved character configuration. This message is displayed when 8 the pattern selected in embroidery mode is larger than the embroidering area of the medium embroidery frame while the small or medium embroidery frame is attached. Appendix 201