Brother International Innov-ís 2800D Users Manual - English - Page 45
Sewing Heavyweight Fabric, Sewing Lightweight Fabric
View all Brother International Innov-ís 2800D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
SEWING Sewing Heavyweight Fabric ■ If the Fabric Does Not Fit Under the Presser Foot The presser foot lever can be raised to two different positions. If the fabric is too thick to fit under the presser foot, raise the presser foot lever to its highest position so that the fabric can be placed under the presser foot. b While keeping the black button on the left side of presser foot "J" pressed in, lower the presser foot lever. * The presser foot remains level, enabling the fabric to be fed. Once the trouble spot has been sewn, the 2 presser foot will return to its normal operation. Sewing Basics Memo If the fabric cannot be smoothly placed under the presser foot, select the presser foot height higher on the setting screen (see page 20). The default is 7.5mm from the needle plate when the presser foot is raised. ■ If the Fabric Does Not Feed If the fabric does not feed when starting to sew or when sewing thick seams, press the black button on the left side of presser foot "J". CAUTION • Do not forcefully push fabrics more than 6 mm (approx. 1/4 inch) thick through the sewing machine. This may cause the needle to break and cause injury. Sewing Lightweight Fabric Iron the fabric with starch or place thin paper or tear away embroidery stabilizer under thin fabrics to make sewing easier. Gently tear off the paper or the stabilizer after sewing. a Raise the presser foot lever. a a Thin paper 43