Brother International Innov-ís 2800D Users Manual - English - Page 36

CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT CAUTION • Always press in the operation panel before changing the presser foot. If is not pressed and the "Start/Stop" button or another button is pressed, the machine will start and may cause injury. • Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, and may cause injury. • Only use presser feet made for this machine. Using other presser feet may lead to accident or injury. Removing the Presser Foot c Raise the presser foot lever. a Press the "Needle Position" button to raise the needle. b Press . → The screen changes, and all keys and operation buttons are locked. d Press the black button on the presser foot holder to remove the presser foot. a b a Black button b Presser foot holder Attaching the Presser Foot a Place the presser foot under the holder, aligning the pin on the foot with the notch in the holder, and then lower the presser foot lever so that the presser foot pin snaps into the notch in the holder. a b a Notch b Pin b Press screen. , or press in the → All keys and operation buttons are unlocked, and the previous screen is displayed. c Raise the presser foot lever. 34