Brother International Innov-is 1000 Operation Manual - Page 134

Attaching the Embroidery Foot This section describes how to attach the embroidery foot. Attaching the embroidery foot Attach the embroidery foot when embroidering. Have the included embroidery foot "Q" and a screwdriver ready. CAUTION ● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if (Start/stop button) is accidentally pressed and the machine starts sewing. 1 Raise the presser foot lever. c 2 a Embroidery foot bar b Caught by the presser foot holder screw CAUTION ● Always use the embroidery foot "Q" when embroidering. If the wrong presser foot is used, the needle may hit the presser foot and break or bend. a a Presser foot lever 4 X The presser foot is raised. • At the time of purchase, the presser foot lever is up. Press (Needle position button) once or a twice to raise the needle. Press and hold the black button on the back of d the presser foot holder to detach the presser foot. a 1 a Needle position button X The needle goes up. Turn off the sewing machine. b b a Black button b Presser foot holder Attaching the Embroidery Foot 133