Brother International Innov-is 1000 Operation Manual - Page 45
Removing and attaching the, presser foot holder
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
GETTING READY Removing and attaching the presser foot holder Hold the presser foot holder in place with your c right hand, and then tighten the screw using the screwdriver in your left hand. Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the embroidery foot and quilting foot. Use the screwdriver to remove the presser foot holder. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 42). Use the screwdriver to loosen the presser foot b holder screw. 1 a Screwdriver Note z If the presser foot holder is not correctly installed, the thread tension will be incorrect. b ac a Screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Raise the presser foot lever. a Align the presser foot holder with the lowerb left side of the presser bar. 44