Brother International Innov-is 1000 Operation Manual - Page 135
Be sure to tighten the screw with
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
EMBROIDERY Loosen the presser foot holder screw and e remove the presser foot holder. Turn the screwdriver toward the back. Secure the embroidery foot with the presser h foot holder screw. Set the embroidery foot perpendicular. a b c a Screwdriver b Presser foot holder c Presser foot holder screw Hold the embroidery foot with your right f hand, as shown. Hold the embroidery foot with your index finger wrapped around the lever at the back of the foot. Tighten the presser foot holder screw. i Turn the screwdriver toward the front. a a Lever While pressing in the lever with your finger, fit g the embroidery foot bar over the needle clamp screw to attach the embroidery foot to the presser foot bar. a b CAUTION ● Do not hit the needle with your finger or the embroidery foot "Q" when attaching it. The needle may break or cause injury. ● Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle may hit the presser foot and break or bend. ● Before sewing, always turn the handwheel toward you (counterclockwise) slowly to make sure that the needle does not hit the presser foot. Otherwise, the needle may break or bend. a Embroidery foot bar b Needle clamp screw 134