Brother International Innov-is 1000 Operation Manual - Page 175
Adjusting the LCD, Operation beep
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
APPENDIX Adjusting the LCD If nothing appears in the LCD when the sewing machine is turned on, the brightness of the LCD is either too light or too dark. In such a case, perform the following operation. Turn "OFF" the sewing machine. a Turn the power "ON" while pressing any of the b display panel buttons. Operation beep Each time a key is pressed you will hear one beep. If an incorrect operation is performed you will hear two or four beeps. ■ If a key is pressed (correct operation) One beep sounds. ■ If an incorrect operation is performed Two or four beeps sound. ■ If the machine locks up, for example, because the thread is tangled The sewing machine beeps for four seconds and the machine automatically stops. Be sure to check for the cause of the error, and correct it before continuing to sew. Press c or . Turn "OFF" the sewing machine, then turn it d "ON" again. 174