Brother International Innov-is 1000 Operation Manual - Page 144
Attaching the Embroidery Frame
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Attaching the Embroidery Frame This section describes how to attach the embroidery frame. Attaching the embroidery frame Wind the embroidery bobbin thread onto the a bobbin and set it into the bobbin case. While lightly holding the lever on the frame d holder to the left, align the two pins on the embroidery frame holder with the mounting bracket on the frame, and then press the frame into the embroidery frame holder until a click is heard. • For details, refer to "Winding/Installing the Bobbin" (page 23). 2 Raise the presser foot lever. b a a Presser foot lever Pass the embroidery frame under the presser c foot while raising the presser foot lever even further. 1 a Lever b Pins 4 • Be sure to insert both pins. If only the forward or the back pin is inserted, the pattern may not turn out correctly. CAUTION ● Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury. CAUTION ● Do not hit the needle with your finger or the embroidery frame. It may cause injury or needle breakage. Attaching the Embroidery Frame 143