Brother International Innov-is 1000 Operation Manual - Page 73
Press the stitch selection., If necessary, specify the setting for automatic, reverse/reinforcement
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
UTILITY STITCHES Press the stitch selection. d (Previous page key) displays the previous screen, and (Next page key) displays the next screen. When a decorative stitch is selected Note z When a stitch is selected, the icon for the presser foot that should be used appears on the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again. ih Memo z For details on adjusting the stitch width and length, refer to "Adjusting the stitch width" (page 56) and "Adjusting the stitch length" (page 57). g a f b e cd a Decorative stitch selection b Set width, length and tension c Single stitch sewing d Repeat sewing e Horizontal mirror image f Delete a selected pattern g Check combined pattern h Automatic thread cutting i Automatic reverse/reinforcement stitch • To select a different stitch, press to remove the selected pattern. If necessary, specify the setting for automatic e reverse/reinforcement stitching and adjust the stitch length, etc. • For details on sewing with each of the utility stitches, refer to the following pages. 72