Brother International Innov-is 1000 Operation Manual - Page 157

EMBROIDERY Editing and Saving Patterns This section describes ways to edit, adjust, reposition and memorize patterns. Adjusting the layout Check and adjust the layout. c a bc d e f The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size. Memo z Keys that appear surrounded with a dotted line cannot be used. After selecting the embroidery pattern, press a . X The sewing screen is displayed. Press . b g k h j i a Layout within the frame b Available embroidery frames c Display unit (cm/INCH) d Change position keys e Size key f Layout key g Rotation key h Horizontal mirror image key i Distance from the center j Embroidery size k Starting point key Embroidery frame size These flash if the pattern was resized, the layout was adjusted, or the recommended embroidery frame size was changed. Embroidery frame icons that appear in gray cannot be used. Size key Increases/decreases the size of the pattern. Press to return to the previous screen. X The layout LCD is displayed. 156 Decreases size Returns to original size Increases size Change position keys Moves the embroidery position up, down, left and right. Return to center position (when the pattern was moved with the change position key) • If you make a note of the values in the lower part of screen when you change the size and position, you can sew with the same size and layout even if you have to turn the power back on in the middle of your work.