Brother International Innov-is 1000 Operation Manual - Page 92
Inserting a side zipper
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Inserting a side zipper Press open the seam allowance from the d wrong side of the fabric. Stitching is visible on only one piece of fabric. Use this type of zipper application for side openings and 1 back openings. 1 2 a Wrong side of fabric Press the seam allowance so that the right side e (the side that will not be stitched) has an extra 3 mm (1/8 inch). 3 a Stitching b Right side of fabric c End of zipper opening The following procedure will describe how to stitch on the left side, as shown in the illustration. 3 1 Attach zigzag foot "J". a Sew straight stitches up to the zipper opening. b With the right sides of the fabric facing each other, sew reverse stitches after reaching the zipper opening. • For details, refer to "Basic stitching" (page 78). 2 a Wrong side of fabric b 3 mm (1/8 inch) Align the zipper teeth with the pressed edge of f the fabric having the extra 3 mm (1/8 inch), and then baste or pin the zipper in place. Using a basting stitch, continue sewing to the c edge of the fabric. 2 1 1 3 2 4 a Basting stitching b Reverse stitches c Wrong side of fabric d End of zipper opening a Zipper teeth b Basting stitching Attach the presser foot holder to the right pin g of zipper foot "I". If the stitching will be sewn on the right side, attach the presser foot holder to the left pin of the zipper foot. 1 I 2 a Pin on the right side b Needle drop point • For details, refer to "Replacing the presser foot" (page 42). Zipper Insertion 91