Brother International Innov-is 1000 Operation Manual - Page 30
Upper Threading
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Upper Threading This section describes how to position the spool for the upper thread, and then thread the needle. CAUTION 1 ● When threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled or the needle may bend or break. About the spool of thread Information about the spools of thread is described below. CAUTION ● Three spool cap sizes are available, allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool or the needle may break. Threading the upper thread Set the spool of thread on the spool pin, and then thread the machine. Turn on the sewing machine. a Raise the presser foot lever to raise the presser b foot. a a Presser foot lever Note z If the presser foot is not raised, the sewing machine cannot be threaded. Upper Threading 29